central locking problem help
Printed From: Bavarian-Board.co.uk - BMW Owners Discussion Forum
Category: Technical & Model Specific Forums
Forum Name: BMW 3 Series
Forum Discription: This forum will deal with any issues on the BMW 3 Series (E21, E30, E36, E46, E90, E91 & E92)
URL: http://www.bavarian-board.co.uk/forum_posts.asp?TID=3255
Printed Date: 14-June-2024 at 15:52
Topic: central locking problem help
Posted By: zimzima
Subject: central locking problem help
Date Posted: 22-September-2003 at 16:56
|
Hi can anyone tell me what colour wires control the central lockings opening and closeing on the in the diver on the 316i 1991 as im trying to fit, remote central locking to my car but cant as i dont no which wires to contect
Thanks Kurt |
Replies:
Posted By: shafman
Date Posted: 05-October-2003 at 23:15
have you tried www.bmwdatabase.com/
|
Posted By: stevieboy
Date Posted: 08-October-2003 at 17:00
|
HI KURT,
REGARDS YOU'RE CENTRAL LOCKING PROBLEM, I IN THE PAST FITTED THESE ALARM SYSTEMS TO E36 MODELS. I CAN'T REMEMBER WIRING /COLOURS OF THE TOP OF MY HEAD BUT ITS NOT DIFFICULT TO TRACE WIRES.YOU ARE LOOKING IN THE DRIVERS FOOTWELL AREA BEHIND PANEL THERE ARE WIRING LOOMS ON BMW. THE WIRES YOU ARE LOOKING FOR ARE USUALLY THIN WIRES.YOU HAVE A POSITIVE PLUSE TO OPEN CAR AND AND A NEGATIVE PLUSE TO CLOSE AND LOCK CAR.TO BE SAFE USE A FUSED 10AMP LINK FUSE PROD WIRE WITH A LIVE FEED VIA FUSE WHEN YOU FEED THE RITE WIRE THE CAR WILL OPEN REMEMBER TO LOCK CAR OR PUSH BUTTONS DOWN.TO GET CLOSE FEATURE GIVE IT A EARTH BY PRODING INTO WIRES.THATS HOW ITS DONE WITHOUT KNOWING WIRING ..ON CAR GOOD LUCK... |
Posted By: zimzima
Date Posted: 09-October-2003 at 01:05
|
Thanks for that it worked a treat Kurt |
Posted By: parkinsont
Date Posted: 21-October-2003 at 23:56
|
On kinda the same theme. Did M reg 316i's come with remote locking?? And is it possible to link the remote cobra alarm to the central locking??? Cheers Tim
|