Print Page | Close Window

Removal of Centre Console E34

Printed From: Bavarian-Board.co.uk - BMW Owners Discussion Forum
Category: Technical & Model Specific Forums
Forum Name: BMW 5 Series
Forum Discription: This forum will deal with any issues on the BMW 5 Series (E12, E28, E34, E39, E60 & E61)
URL: http://www.bavarian-board.co.uk/forum_posts.asp?TID=24811
Printed Date: 02-May-2024 at 14:19


Topic: Removal of Centre Console E34
Posted By: GaryP
Subject: Removal of Centre Console E34
Date Posted: 04-December-2005 at 08:18
I am upgrading the heater/air system within the the car of my 518i to fit rear vents between the seats.

I have not had the vehicle very long and am wondering if anyone can tell me where the fixing points are for this so I dont damage anything trying to take it out.

I need to remove from the whole unit from the heater box back to the rear between the two front seats.

I have searched the net and this forum and can find nothing.




Replies:
Posted By: NOISUFNOC
Date Posted: 04-December-2005 at 09:27

You should be able to work out the mountings from the pics below.

most awkward one is the front console at side it hides under the side panel under the steering wheel.

 



-------------
528 for now


Posted By: GaryP
Date Posted: 04-December-2005 at 11:36
You star that is spot on. Thank you.

As a matter of interest, where did you get the diagrams from ?


Posted By: fingerman
Date Posted: 04-December-2005 at 14:23
Good luck with this - it's fairly easy to do - I just figured it out without the diagram (which would have come in very useful !) It took about an hour to do.

It's quite a tight fit, but it will go - just remove some of the padding under the gear box area and feel your way to find the capped off end of the vent - just unscrew and pull off.

If you look at the first diagram I couldn't get no. 3 back in place as it was too tight and it ended up snapping! And I ended up with a few screws left at the end?

No harm done as these things a built really well and everything fitted snuggley back into place


-------------
Current: E34 1996 525tds 113-125k
Previous: 9xE34s, 5xE30s, 2xE39s, 1xE32, 1xE36.... phew!
My Ebay bits: http://search.ebay.co.uk/_W0QQsassZseany69ukQQhtZ-1


Posted By: NOISUFNOC
Date Posted: 04-December-2005 at 15:01

Very useful for all those diagrams and part numbers you need.

http://www.realoem.com/bmw/select.do - http://www.realoem.com/bmw/select.do



-------------
528 for now


Posted By: GaryP
Date Posted: 05-December-2005 at 06:29
Originally posted by fingerman fingerman wrote:


It's quite a tight fit, but it will go - just remove some of the padding under the gear box area and feel your way to find the capped off end of the vent - just unscrew and pull off.


So you didn't take the front section off at all ?? Thats the bit I have been dreading.

Thanks everyone for your help.


Posted By: fingerman
Date Posted: 05-December-2005 at 15:16
No, bent it back - and felt my way to where the air vent was.

It didn'd do any damage and all went back in place - if I would have taken off the front section maybe it would have been a different matter !

Good luck, I'm a novice so you should be ok - let us know your outcome


-------------
Current: E34 1996 525tds 113-125k
Previous: 9xE34s, 5xE30s, 2xE39s, 1xE32, 1xE36.... phew!
My Ebay bits: http://search.ebay.co.uk/_W0QQsassZseany69ukQQhtZ-1


Posted By: GaryP
Date Posted: 12-December-2005 at 17:30
Originally posted by fingerman fingerman wrote:

No, bent it back - and felt my way to where the air vent was.

It didn'd do any damage and all went back in place - if I would have taken off the front section maybe it would have been a different matter !

Good luck, I'm a novice so you should be ok - let us know your outcome


I had to take the front bit off but heater and rear ciggie lighter all in and working.


-------------
Current:
1991 E34 518i 98k FSH
Previous:
1990 E30 316i 130k
1988 E28 520i 130k
1984 E30 325I 120k



Print Page | Close Window