Print Page | Close Window

PPPP Error Code???

Printed From: Bavarian-Board.co.uk - BMW Owners Discussion Forum
Category: Technical & Model Specific Forums
Forum Name: BMW 7 Series
Forum Discription: This forum will deal with any issues on the BMW 7 Series (E23, E32, E38, E65, E66, E67 & E68)
URL: http://www.bavarian-board.co.uk/forum_posts.asp?TID=18305
Printed Date: 03-May-2024 at 07:07


Topic: PPPP Error Code???
Posted By: stuartg
Subject: PPPP Error Code???
Date Posted: 31-May-2005 at 08:23
My E32 735i se is displaying PPPP on the fuel computer and nothing else. The dash display has also stopped working. The rev counter and speedo work but nothing else. The car has been sitting for a few months and the battery went flat.

My local BMW dealer has advised to disconnect the battery for 30 minutes to reset the module. I have done this twice now with no success.

Any suggestions most welcome!



Replies:
Posted By: Chas C
Date Posted: 31-May-2005 at 09:24

I may be wrong but just disconnecting the battery for 30 minutes will not discharge the capacitors in the system completely.  You need to short the +ve and -ve leads (once they are OFF the battery!!) and then turn on the ignition for a few seconds.  Some people like to connect a 12v bulb between the leads so as not to discharge the system without resistance but I don't believe this is strictly necessary.



-------------


Posted By: AaronM3
Date Posted: 31-May-2005 at 09:31
With the key in the "Radio" position (Radio and OBC light up, but not the instrument cluster), press the "CODE" button. Then push the little reset-hole with a Pen and hold it, 'till the computer blinks in the display, and it will ask you for a time and date entry.

-------------


Posted By: stuartg
Date Posted: 31-May-2005 at 09:34
Thanks for that. Is this a common problem?
If this doesn't work, is there anything else that i can try? My local dealer wants £70 to plug it into their diagnostic machine...!


Posted By: AaronM3
Date Posted: 31-May-2005 at 09:42

When I went through a period of not using my M3 that regularly the battery died a few times and one of the times I jump started it the OBC showed 'PPPP'.

I think it may when there's an electrical surge hasn't happened every time I've had to jump it.

The method above worked for me though.



-------------


Posted By: shogun
Date Posted: 31-May-2005 at 10:26

Usually when battery is disconnected, the BC will show PPPP.

Just enter/set correct time and date on the BC and then it should disappear. Just did that on my car last Saturday.



-------------
E32 750iL,E36 M3

http://twrite.org/shogunnew/topmenu.html" rel="nofollow - 7 Series Tech Tips



Posted By: stuartg
Date Posted: 31-May-2005 at 11:18
All of the dash display is also off. The rev counter and speedo work but the temp, fuel and all LCD displays are totally blank. Is this normal?


Posted By: shogun
Date Posted: 01-June-2005 at 04:19

Off= no lights on or indication at all? Bulbs are easy to change. If no function at all, remove cluster and disconnect the plugs on the backside, as well as the check control module in fuse box in engine room, spray with contact spray, then connect again.Read a bit on Johan and Sean's page about changing bulbs on the cluster.Also read about capacitor change in the cluster.

http://shrubbery.student.utwente.nl/ - http://shrubbery.student.utwente.nl/



-------------
E32 750iL,E36 M3

http://twrite.org/shogunnew/topmenu.html" rel="nofollow - 7 Series Tech Tips




Print Page | Close Window