folks,
this happens intermittently especially when i'm rough with the
gearchange (especially the lower gears) or when i let try to accelerate
in a high gear.
what is the symptom for:
1. wear in engine mounting?
2. wear in rear pittman (dogbone) arms?
3. wear in center bearing (prop shaft)
i have already changed the plastic bushing for the gearlever pivot and
also the plastic white spline bushing near the center prop shaft
coupling.
another issue i have is vagueness in selecting 3rd. or 5th gear - the
horizontal travel plane feels a bit loose. again this is intermittent
and happens when i downshift from 5th. to neutral when i cruise to a
stop. thereafter selecting 5th. usually involves an effort to push
similar to the reverse detent effort.
Edited by ktteoh