Induction Kit and Exhaust E36 M3 |
Post Reply | Page 12> |
Author | |
jameswrx
Newbie Joined: 30-May-2004 Location: United Kingdom Status: Offline Points: 11 |
Topic: Induction Kit and Exhaust E36 M3 Posted: 30-May-2004 at 13:53 |
First off, hello. My first post on here, I've been lurking for a while I've recently bought an E36 M3, 3.0l 95 model. What I want to know is.. Is there an induction (airbox replacement) kit available for this car?. I've seen panel filters, but no induction kit. I'm also looking for an aftermarket exhaust system (including de-cat), seen a few of these available. Now before I get flamed I'm not a boy racer but who can't appreciate the sound these cars make??. Thing is it's only just audible, I've seen/heard an m3 with de-cat system at full chat and it sounded awesome, almost Ferrari 'esque. I want the induction and exhaust system purely to enjoy the superb sound. Any info would be great. Also, has anyone fitted the steering joint (was a failing prob on these cars) themselves?, I've got a new one coming and intend putting it on myself, any tips?. I rang bmw and it was replaced in 2001 and despite me saying it'd gone quickly and did they want to replace it again, they were'nt playing ball. |
|
Sponsored Links | |
MONO
Really Senior Member II Joined: 04-August-2003 Location: United Kingdom Status: Offline Points: 560 |
Posted: 30-May-2004 at 15:41 |
dude, Welcome, good to see another 3.0L M3 on the board Okay, Supersprint do the best Decat pipe, this is around £270. Rear boxes you have a big selection. so depending on your price range you are looking at £275 for a Mongoose, £340 for a scorpion, £380 Supersprint(too quiet) or right up to £795 for an ACSchnitzer. I know peeps on here dont like Scorpions, but IMO it is the best value and looks and sounds nice. The STW tail pipes are the best bet. as they look close to standard just slightly bigger diameter. Induction Kits, you have to be a bit careful here, the best one is the GruppeM induction kit but this is around £500 , you will get cheaper ones available but make sure they come with a heat shield. I have a BMC F1 panel filter in mine, a Supersprint Decat and ACS rear box. Would love the GruppeM but its too much of the green stuff. I love the sound of my motor, it turns heads and no one has said it sounds crap. Everyone loves it including me |
|
|
|
Stone-IslandV8
Really Senior Member II Joined: 31-January-2003 Location: North Somerset Status: Offline Points: 3015 |
Posted: 30-May-2004 at 17:16 |
James
Get yourself around and ask to hear peoples engines running-I run a k&n panel filter with supersprint decat and backbox and would disagree with Mono but thats because I wanted a nice sound without excessive volume and thats what I've got. I personally wouldnt want Scorpion but its personal taste. Induction kit you can go from the basic k&n or PiperX kits for under a ton right up to the Cabut kit circa £400 or Gruppe M at £600 or PiperX viper kit for £300. |
|
Gentlemen I may not have a brain but I do have an idea
Past; E39 540T/E46 328CI/ E39 535/ E39 520/ E36 M3/ E36 318iS jet black Mtech/ E46 320d/ E36 318iS diamond black/ E36 318iS blue Mtech kit |
|
jameswrx
Newbie Joined: 30-May-2004 Location: United Kingdom Status: Offline Points: 11 |
Posted: 30-May-2004 at 17:29 |
Thanks for the welcome/info. I didn't realise there were so many induction kits available, being a Japanese car man before and alongside the bmw I've never really come accross places that sell performance stuff for the german cars. Didn't see any induction stuff on ebay, just panel. K&N or pipercross sound ok to me, heat sheild shouldn't be a problem to self fabricate. Anyone got some induction kit pictures fitted?. I presume the k&N fits quite far in the engine bay. Are there any sound clips floating about of M3's with exhaust mods?. |
|
Stone-IslandV8
Really Senior Member II Joined: 31-January-2003 Location: North Somerset Status: Offline Points: 3015 |
Posted: 30-May-2004 at 20:10 |
If you click on the link in my sig for M3 theres some photos on there of my old 318iS with PiperX which I prefer the look of over k&n.
Also, try Supersprint and Ca-auto Whereabouts r u based? |
|
Gentlemen I may not have a brain but I do have an idea
Past; E39 540T/E46 328CI/ E39 535/ E39 520/ E36 M3/ E36 318iS jet black Mtech/ E46 320d/ E36 318iS diamond black/ E36 318iS blue Mtech kit |
|
EvoDude
Really Senior Member I Zymol + Optimax Rock!! Joined: 30-April-2004 Location: Southampton, Hampshire Status: Offline Points: 292 |
Posted: 31-May-2004 at 11:10 |
Dudes, just a question to tap into your knowledge about pipes then... My rear box is aftermarket and stamped on the underside is "Remus" and "ACSnitzer". Ive seen the Remus ones retail for about £400, but then u say the AC ones are £800. I dont know much bout pipes but is this a collaboration between the two makes or something? Im presuming mine must have cost somewhere in the middle, about £600?!? Any ideas appreciated! |
|
E36 ///M3 Evo - Dyno'd at 323.3 Bhp
Modded. Mint. |
|
Stone-IslandV8
Really Senior Member II Joined: 31-January-2003 Location: North Somerset Status: Offline Points: 3015 |
Posted: 31-May-2004 at 12:03 |
Whats on the tailpipes themselves Neil?
ACS, Hamann and Hartge to name but 3 don't make the pipes themselves-they use exhaust manufacturers to make pipes to their spec. Supersprint for example are apparently all handmade. |
|
Gentlemen I may not have a brain but I do have an idea
Past; E39 540T/E46 328CI/ E39 535/ E39 520/ E36 M3/ E36 318iS jet black Mtech/ E46 320d/ E36 318iS diamond black/ E36 318iS blue Mtech kit |
|
EvoDude
Really Senior Member I Zymol + Optimax Rock!! Joined: 30-April-2004 Location: Southampton, Hampshire Status: Offline Points: 292 |
Posted: 31-May-2004 at 12:33 |
John, On the actual pipes themselves it says ACSnitzer. This is also stamped on the rearbox but with Remus in smaller writing under it. Neil |
|
E36 ///M3 Evo - Dyno'd at 323.3 Bhp
Modded. Mint. |
|
Stone-IslandV8
Really Senior Member II Joined: 31-January-2003 Location: North Somerset Status: Offline Points: 3015 |
Posted: 31-May-2004 at 20:40 |
If memory serves me right ACS are made by Remus so thats probably it.
Other poss might be remus with ACS tailpipe trims? |
|
Gentlemen I may not have a brain but I do have an idea
Past; E39 540T/E46 328CI/ E39 535/ E39 520/ E36 M3/ E36 318iS jet black Mtech/ E46 320d/ E36 318iS diamond black/ E36 318iS blue Mtech kit |
|
MONO
Really Senior Member II Joined: 04-August-2003 Location: United Kingdom Status: Offline Points: 560 |
Posted: 01-June-2004 at 10:51 |
Dudes, Johns right, ACS exhausts are made by the austrian firm Remus.....Basically the ACS bumps the price up as I dont think there is much difference from a standard Remus box?? I have one on my car and it has the ACS stamp underneath along with Remus in small writing. |
|
|
|
encomium
Really Senior Member I Joined: 06-January-2004 Location: United Kingdom Status: Offline Points: 403 |
Posted: 01-June-2004 at 15:41 |
i was wondering why no one had mentioned remus (up till now)?
they have anlways made quality exhaust back boxes and look and sound good too (not too loud, just that low rumble). If you look in the demon tweeks catalogue, you'll see that they're around 300-350 (which is pretty good value considering they make the ACS boxes too, so you're getting something pretty similar). As for intakes, as mentioned before Gruppe M is probably the best, unless you have loads of ££ to burn, then go for the full carbon boxes. |
|
94 E36 M3 Coupe
|
|
mrbon
Groupie Joined: 01-June-2004 Location: United Kingdom Status: Offline Points: 46 |
Posted: 01-June-2004 at 15:51 |
are there any induction kits that incorporate a decnt heatshield available for a lower price than the gruppe m? thinking of buying one but dont just want to stick a k&n on, nor do i want to go crazy with the ££££'s |
|
Stone-IslandV8
Really Senior Member II Joined: 31-January-2003 Location: North Somerset Status: Offline Points: 3015 |
Posted: 01-June-2004 at 18:56 |
Gentlemen I may not have a brain but I do have an idea
Past; E39 540T/E46 328CI/ E39 535/ E39 520/ E36 M3/ E36 318iS jet black Mtech/ E46 320d/ E36 318iS diamond black/ E36 318iS blue Mtech kit |
|
MONO
Really Senior Member II Joined: 04-August-2003 Location: United Kingdom Status: Offline Points: 560 |
Posted: 01-June-2004 at 21:12 |
Also BMC do the CDA kit which is supposed to be very good this is around £270 mark I think
|
|
|
|
mrbon
Groupie Joined: 01-June-2004 Location: United Kingdom Status: Offline Points: 46 |
Posted: 01-June-2004 at 22:15 |
just found the BMC-CDA for the 3.0 M3 for £199!! http://www.passionmotorsport.co.uk/BMC1.htm looks good @ that price i think ill have to make the purchase!! |
|
Stone-IslandV8
Really Senior Member II Joined: 31-January-2003 Location: North Somerset Status: Offline Points: 3015 |
Posted: 01-June-2004 at 22:50 |
Personally I'd have to go for the Viper cos:
a] I know someone at PiperX and they did me a 1-off for the 318iS very cheap. b]check out the pics of it on their website-it looks the mutts John |
|
Gentlemen I may not have a brain but I do have an idea
Past; E39 540T/E46 328CI/ E39 535/ E39 520/ E36 M3/ E36 318iS jet black Mtech/ E46 320d/ E36 318iS diamond black/ E36 318iS blue Mtech kit |
|
MONO
Really Senior Member II Joined: 04-August-2003 Location: United Kingdom Status: Offline Points: 560 |
Posted: 01-June-2004 at 23:07 |
Nice one Mr Bon, Looks like I might have to invest at some point......problem is I fancy the GruppeM, my friend has just fitted one so I will see what it is like. Another friend is fitting a BMCCDA to his EVO so I will see what that is like to
Then I can make a decision |
|
|
|
MONO
Really Senior Member II Joined: 04-August-2003 Location: United Kingdom Status: Offline Points: 560 |
Posted: 01-June-2004 at 23:10 |
John, Dude I had a look on the link but couldnt find it?? i found something about ECIS filters?? they looked okay |
|
|
|
Stone-IslandV8
Really Senior Member II Joined: 31-January-2003 Location: North Somerset Status: Offline Points: 3015 |
Posted: 02-June-2004 at 08:48 |
Gentlemen I may not have a brain but I do have an idea
Past; E39 540T/E46 328CI/ E39 535/ E39 520/ E36 M3/ E36 318iS jet black Mtech/ E46 320d/ E36 318iS diamond black/ E36 318iS blue Mtech kit |
|
mrbon
Groupie Joined: 01-June-2004 Location: United Kingdom Status: Offline Points: 46 |
Posted: 02-June-2004 at 18:07 |
anyone got any opinions or experience of the bmc-cda? i may order one when i get my exhaust... Edited by mrbon |
|
Post Reply | Page 12> |
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |