Bavarian-Board.co.uk - BMW Owners Discussion Forum Homepage
Forum Home Forum Home > Technical & Model Specific Forums > BMW 5 Series
  New Posts New Posts RSS Feed - Alloy Wheel Stuck on hub
  FAQ FAQ  Forum Search   Register Register  Login Login

Forum LockedAlloy Wheel Stuck on hub

 Post Reply Post Reply Page  12>
Author
Message
Andrew Rolland View Drop Down
Moderator Group
Moderator Group
Avatar
Go away rain

Joined: 19-August-2004
Location: Scotland
Status: Offline
Points: 6579
Post Options Post Options   Thanks (0) Thanks(0)   Quote Andrew Rolland Quote  Post ReplyReply Direct Link To This Post Topic: Alloy Wheel Stuck on hub
    Posted: 08-October-2007 at 09:36

Saturday afternoon.

I wanted to remove all four wheels to power wash the wheels and the wheel arches.

Jacked up O/S/F and removed wheel bolts.  Alloy stuck on rim.  After rotating the wheel and tapping gentlyish the tyre sidewall on the inside with a 2lbs lump hammer the rim dropped off the hub.  Same thing on the N/S/F.  O/S/R fell off easily as the garage had greased this for me as they had to remove the wheel to a) take out the scuff mark on the alloy and put a new tyre on the rim as part of the deal.

Then it came to the N/S/R.  It was well and truly stuck on.  I had to put the Car in N and release the handbrake so that I could spin the wheel as I gently struck the side wall with the hammer.

Nothing happening.  I wasn't keen the have the car jacked up with only three bricks holding the thing from moving while reaching under to strike the tyre.  Gave up as I wanted to wash the car before it got dark.

No grease on any hub spigots other than the N/S/R and there was no grease on any wheel bolts.  So much for BMW giving these items a proper look when servicing.

Anyone got any suggestions for removing an alloy wheel from the hub other than just persevering with a hammer?

Andrew

Be exclusive and drive a Petrol 5 Series!

Current
'13 62 F10 535i MSport Auto

Previous
'04 04 E60 545i SE Auto
'03 53 E60 545i SE Auto (Stolen)
'98 S E39 523i SE Auto
Back to Top
Sponsored Links


Back to Top
kbannon View Drop Down
Admin Group
Admin Group
Avatar
E39 525i Sport Individual

Joined: 09-October-2002
Location: 64 Zoo Lane
Status: Offline
Points: 15508
Post Options Post Options   Thanks (0) Thanks(0)   Quote kbannon Quote  Post ReplyReply Direct Link To This Post Posted: 08-October-2007 at 09:51
Put the other wheels on securely. Loosen the bolts for the N/S/R wheel and start driving out your driveway. That should loosen it!
Current: 2009 E60 520d "Sport" tractor
Previous: 1989 E30 320i SE
1997 E39 523i
2003 E39 525i Sport Individual
Back to Top
jetsetwilly2000 View Drop Down
Really Senior Member II
Really Senior Member II
Avatar

Joined: 10-December-2003
Location: Cambridgeshire
Status: Offline
Points: 701
Post Options Post Options   Thanks (0) Thanks(0)   Quote jetsetwilly2000 Quote  Post ReplyReply Direct Link To This Post Posted: 08-October-2007 at 10:20
I second the above, tho make sure you only loosen the bolts a little.  Otherwise kicking is good (has always worked for me) but make sure only the offending wheel is off the gound.
E90 M3 DCT, E46 330d Touring, VW T5 wannabecamper

Previous: Disco 3 TDV6, 2x E34 540i6,

E34 535iS

Back to Top
Lancastrian View Drop Down
Bavarian-Board Contributor
Bavarian-Board Contributor


Joined: 10-July-2004
Location: Lancashire, UK
Status: Offline
Points: 760
Post Options Post Options   Thanks (0) Thanks(0)   Quote Lancastrian Quote  Post ReplyReply Direct Link To This Post Posted: 08-October-2007 at 12:17

Had this problem with an E46.

Easiest solution I found was to slacken off the bolts, jack up the car, remove the bolts and then start lowering the jack. The corrosion just cracked and the wheel was loose well before getting down to normal ride height.

Use a thin film of copperslip on the hub or wheel to prevent it happening again.

E30 M3 Project - Specification TBC
Back to Top
Andrew Rolland View Drop Down
Moderator Group
Moderator Group
Avatar
Go away rain

Joined: 19-August-2004
Location: Scotland
Status: Offline
Points: 6579
Post Options Post Options   Thanks (0) Thanks(0)   Quote Andrew Rolland Quote  Post ReplyReply Direct Link To This Post Posted: 08-October-2007 at 14:19
Originally posted by Lancastrian Lancastrian wrote:

Had this problem with an E46.

Easiest solution I found was to slacken off the bolts, jack up the car, remove the bolts and then start lowering the jack. The corrosion just cracked and the wheel was loose well before getting down to normal ride height.

Use a thin film of copperslip on the hub or wheel to prevent it happening again.

Thanks, I'll try that one out.  Not sure when though.  I put copperslip on the three wheels that I removed.

Andrew

Be exclusive and drive a Petrol 5 Series!

Current
'13 62 F10 535i MSport Auto

Previous
'04 04 E60 545i SE Auto
'03 53 E60 545i SE Auto (Stolen)
'98 S E39 523i SE Auto
Back to Top
Allan320 View Drop Down
Really Senior Member II
Really Senior Member II
Avatar
Obsessive Detailer!

Joined: 03-March-2005
Location: Glasgow
Status: Offline
Points: 669
Post Options Post Options   Thanks (0) Thanks(0)   Quote Allan320 Quote  Post ReplyReply Direct Link To This Post Posted: 08-October-2007 at 17:15
This happened to me on my E46 as well.  I put copper slip on also then when I went to take the rim off later, it had stuck again.

I just persevered by spinning the wheel and hitting the side walls with my hands until it loosened it enough
Back to Top
Mick525i View Drop Down
Bavarian-Board Contributor
Bavarian-Board Contributor
Avatar

Joined: 29-November-2005
Location: Dublin Ireland.
Status: Offline
Points: 1823
Post Options Post Options   Thanks (0) Thanks(0)   Quote Mick525i Quote  Post ReplyReply Direct Link To This Post Posted: 08-October-2007 at 19:41

Tis a common problem. Your hit trying hard enough.....

As above just keep tapping the wheel as you rotate it it will come off..

Mick

Cheers
Mick

BMW E21 318 1980
BMW E39 525i 2002 MTech
VW Golf Gti 2003
Back to Top
marty e38 sport View Drop Down
Newbie
Newbie


Joined: 08-October-2007
Location: dublin
Status: Offline
Points: 12
Post Options Post Options   Thanks (0) Thanks(0)   Quote marty e38 sport Quote  Post ReplyReply Direct Link To This Post Posted: 08-October-2007 at 19:47
 yes use a plastic mallet and hit the wheel at the point where the tyre meets the alloy.once off put copper grease on hub and wheels will come off easier next time.
Back to Top
BeemaBoy View Drop Down
Really Senior Member II
Really Senior Member II
Avatar
Starting a Collection

Joined: 25-October-2004
Location: Johannesburg, South Africa
Status: Offline
Points: 927
Post Options Post Options   Thanks (0) Thanks(0)   Quote BeemaBoy Quote  Post ReplyReply Direct Link To This Post Posted: 11-October-2007 at 11:17

Hmmm...is this problem model specific?

I always get fed up of trying to take off and put my wheels back on the E34 because as soon as I start removing the last wheel bolt, the thing wants to fall off and I end up having to hold it against the hub with my shoulder... Never had a wheel stick on with either of my cars...

BB

87 E30 320I
95 E34 525I Auto, Executive Package, Arctic Silver
98 E38 740I Steptronic, Silver
Back to Top
kbannon View Drop Down
Admin Group
Admin Group
Avatar
E39 525i Sport Individual

Joined: 09-October-2002
Location: 64 Zoo Lane
Status: Offline
Points: 15508
Post Options Post Options   Thanks (0) Thanks(0)   Quote kbannon Quote  Post ReplyReply Direct Link To This Post Posted: 11-October-2007 at 11:51
Never say never Rawdon!
Current: 2009 E60 520d "Sport" tractor
Previous: 1989 E30 320i SE
1997 E39 523i
2003 E39 525i Sport Individual
Back to Top
Lancastrian View Drop Down
Bavarian-Board Contributor
Bavarian-Board Contributor


Joined: 10-July-2004
Location: Lancashire, UK
Status: Offline
Points: 760
Post Options Post Options   Thanks (0) Thanks(0)   Quote Lancastrian Quote  Post ReplyReply Direct Link To This Post Posted: 11-October-2007 at 13:57
Originally posted by BeemaBoy BeemaBoy wrote:

Hmmm...is this problem model specific?

I always get fed up of trying to take off and put my wheels back on the E34 because as soon as I start removing the last wheel bolt, the thing wants to fall off and I end up having to hold it against the hub with my shoulder... Never had a wheel stick on with either of my cars...

BB

I think its to do with the amount of rain, snow and ice we get  - and the salt used to melt it - so maybe you don't have the same problems in your part of the world.

E30 M3 Project - Specification TBC
Back to Top
BeemaBoy View Drop Down
Really Senior Member II
Really Senior Member II
Avatar
Starting a Collection

Joined: 25-October-2004
Location: Johannesburg, South Africa
Status: Offline
Points: 927
Post Options Post Options   Thanks (0) Thanks(0)   Quote BeemaBoy Quote  Post ReplyReply Direct Link To This Post Posted: 11-October-2007 at 15:32

Originally posted by kbannon kbannon wrote:

Never say never Rawdon!

Very true...I did touch wood when I wrote it though...

BB

87 E30 320I
95 E34 525I Auto, Executive Package, Arctic Silver
98 E38 740I Steptronic, Silver
Back to Top
kbannon View Drop Down
Admin Group
Admin Group
Avatar
E39 525i Sport Individual

Joined: 09-October-2002
Location: 64 Zoo Lane
Status: Offline
Points: 15508
Post Options Post Options   Thanks (0) Thanks(0)   Quote kbannon Quote  Post ReplyReply Direct Link To This Post Posted: 11-October-2007 at 15:33
Originally posted by BeemaBoy BeemaBoy wrote:

Originally posted by kbannon kbannon wrote:

Never say never Rawdon!

Very true...I did touch wood when I wrote it though...

BB

tsk - this is not a porno site!
Current: 2009 E60 520d "Sport" tractor
Previous: 1989 E30 320i SE
1997 E39 523i
2003 E39 525i Sport Individual
Back to Top
BeemaBoy View Drop Down
Really Senior Member II
Really Senior Member II
Avatar
Starting a Collection

Joined: 25-October-2004
Location: Johannesburg, South Africa
Status: Offline
Points: 927
Post Options Post Options   Thanks (0) Thanks(0)   Quote BeemaBoy Quote  Post ReplyReply Direct Link To This Post Posted: 11-October-2007 at 15:44
Originally posted by Lancastrian Lancastrian wrote:

Originally posted by BeemaBoy BeemaBoy wrote:

Hmmm...is this problem model specific?

I always get fed up of trying to take off and put my wheels back on the E34 because as soon as I start removing the last wheel bolt, the thing wants to fall off and I end up having to hold it against the hub with my shoulder... Never had a wheel stick on with either of my cars...

BB

I think its to do with the amount of rain, snow and ice we get  - and the salt used to melt it - so maybe you don't have the same problems in your part of the world.

Yes...I suppose the salt would go a long way toward gumming up the hub. I was just very suprised that it happens to Andrew's 3 year old car...would expect it on an E34 or E39, but not an E60! How do people manage with cars that have the wheel nuts instead of the wheel bolts...must be twice as hard to shift it off the hub ...

Was lucky enough that I never had to do anything to the wheels of any cars while I was in England ... suppose I am spoilt by a dry, high altitude climate...cars never rust here...and stone chips stay at that...stone chips...you have to really search for a second hand car here that has rust in the arches or doors...

BB

87 E30 320I
95 E34 525I Auto, Executive Package, Arctic Silver
98 E38 740I Steptronic, Silver
Back to Top
Andrew Rolland View Drop Down
Moderator Group
Moderator Group
Avatar
Go away rain

Joined: 19-August-2004
Location: Scotland
Status: Offline
Points: 6579
Post Options Post Options   Thanks (0) Thanks(0)   Quote Andrew Rolland Quote  Post ReplyReply Direct Link To This Post Posted: 11-October-2007 at 17:35

If you had a wheel that is held on with studs (nuts) the vertical loading of the wheel is taken by the studs.

With bolted wheels the load is transfered thru the wheel to the hub via the spigot and not the wheel bolts.  The bolts are just used to clamp the rim and brake disc to the hub. 

My 4 year old car will never have had the rear wheels taken off.  It will still be on original pads and discs at 42,000 miles.

Although the garage I bought it from said they changed the brake fluid.  I am assuming this can be done from a ramp without the need to remove the wheels.  If the garage had to remove the wheels to bleed the brakes the wheels wouldn't have stuck to the spigots.  I had to take all four wheels off to bleed the brakes, which does make me wonder if they did change the brake fluid.

Andrew

Be exclusive and drive a Petrol 5 Series!

Current
'13 62 F10 535i MSport Auto

Previous
'04 04 E60 545i SE Auto
'03 53 E60 545i SE Auto (Stolen)
'98 S E39 523i SE Auto
Back to Top
PJSM3 View Drop Down
Really Senior Member I
Really Senior Member I


Joined: 22-July-2003
Location: United Kingdom
Status: Offline
Points: 468
Post Options Post Options   Thanks (0) Thanks(0)   Quote PJSM3 Quote  Post ReplyReply Direct Link To This Post Posted: 11-October-2007 at 23:52
Originally posted by Andrew Rolland Andrew Rolland wrote:

If you had a wheel that is held on with studs (nuts) the vertical loading of the wheel is taken by the studs.

With bolted wheels the load is transfered thru the wheel to the hub via the spigot and not the wheel bolts.  The bolts are just used to clamp the rim and brake disc to the hub. 

 

Andrew

 

I don't follow that. All the spigot is doing is ensuring the wheel is centered correctly. It should not be under any load once the wheel bolts are tightened.  Once the wheel bolts are torqued up it is the frictional coefficent between the inside wheel face and hub holding the car up; more torque, more friction.  That's why you'll see the wheel face that meets the hub to be grooved so as to increase the friction.

Back to Top
gtmoore View Drop Down
Advanced Newbie
Advanced Newbie


Joined: 08-June-2005
Location: Croydon, Surrey
Status: Offline
Points: 34
Post Options Post Options   Thanks (0) Thanks(0)   Quote gtmoore Quote  Post ReplyReply Direct Link To This Post Posted: 16-October-2007 at 16:13
I've changed brake fluid on my E39 without removing the wheels although the car does need jacking up if you don't have a ramp.

As for the sticking wheels - I had terrible trouble with my full main dealer serviced E39 when I bought it. As others have said, just perseverance did it in the end. Used a rubber mallet and kept whacking the inside of the alloy where it meets the tyre as suggested. Keep turning the wheel a bit as you do it. It should move in the end. All coppper slipped now and have been fine since.

Good luck!

Gavin
Gavin

Current:
E39 525iSE Auto 2001
Previous:
E34 530iV8 Auto 1994
E34 520iSE Auto 1994
E34 520iSE Manual 1990
Back to Top
thepits View Drop Down
Moderator Group
Moderator Group
Avatar

Joined: 09-July-2003
Location: far far away
Status: Offline
Points: 10000473
Post Options Post Options   Thanks (0) Thanks(0)   Quote thepits Quote  Post ReplyReply Direct Link To This Post Posted: 16-October-2007 at 17:30

Originally posted by gtmoore gtmoore wrote:

As for the sticking wheels - I had terrible trouble with my full main dealer serviced E39 when I bought it.

If I had a 'full main dealer serviced' vehicle with sticky wheels - I'd take it back to the dealer, and tell them to get the  things off!

It's all down to sloppy workmanship, no lubricant, and over-tightening - which in turn can stretch the bolt/stud, so making the wheel more susceptible to falling off!

Always hand-torque wheels - never allow anyone near them with those nasty guns!

Cats know your every thought.

But don't care.
Back to Top
gtmoore View Drop Down
Advanced Newbie
Advanced Newbie


Joined: 08-June-2005
Location: Croydon, Surrey
Status: Offline
Points: 34
Post Options Post Options   Thanks (0) Thanks(0)   Quote gtmoore Quote  Post ReplyReply Direct Link To This Post Posted: 16-October-2007 at 17:38
Yeah - but I didn't buy it from a dealer and to be honest I'd rather do it myself.

The tyre shop air guns are deadly when used with the BMW locking bolts.
Gavin

Current:
E39 525iSE Auto 2001
Previous:
E34 530iV8 Auto 1994
E34 520iSE Auto 1994
E34 520iSE Manual 1990
Back to Top
Andrew Rolland View Drop Down
Moderator Group
Moderator Group
Avatar
Go away rain

Joined: 19-August-2004
Location: Scotland
Status: Offline
Points: 6579
Post Options Post Options   Thanks (0) Thanks(0)   Quote Andrew Rolland Quote  Post ReplyReply Direct Link To This Post Posted: 17-October-2007 at 08:15

I did think that it would be possible to change the brake fluid by means of a ramp without taking the wheel off.  The bleed nipples are angled slightly towards the inboard side for that reason I presume.

I have been working late and most weekends since I bought the car so I haven't had a chance to get another look at the wheel.  I have been meaning to buy a rubber mallet so I'll give it another try hopefully this weekend.

I always hand torque my wheel bolts with my torque wrench 120Nm for the E60.  I remeber helping my dad when I was a kid with one of his Cortina's.  It had been to a garage for new tyres and he watched them put the wheels back on with no grease on the nuts or the hubs and with an air gun!  My dad took each wheel off and greased up everything so that he knew he would be able to take the wheel off in an emergency.  No run flats on a 1982 Y plate 2.0 Cortina Crusader!

Andrew

Be exclusive and drive a Petrol 5 Series!

Current
'13 62 F10 535i MSport Auto

Previous
'04 04 E60 545i SE Auto
'03 53 E60 545i SE Auto (Stolen)
'98 S E39 523i SE Auto
Back to Top
 Post Reply Post Reply Page  12>
  Share Topic   

Forum Jump Forum Permissions View Drop Down



This page was generated in 0.195 seconds.